Pioneer A 200 erősitő (100 volt)

The vintage amplifier shown in the pictures is for sale.
It is in very good optical and repair-free condition. 19 kg solidly built piece.
I bought it directly from Japan. I am the first owner in the country.
Bigger brother of the pioneer A 80
Not produced in Eu. For a voltage network.
Only for Japanese 100 volts and American 120 volts as A 90. You can hear its sound quality on some videos on YouTube.
3 pairs of transistors per side in push pull mode,
as well as 8 buffer capacitors, each with a capacity of 22,000 microfarads. 4pcs 50v 4pcs 71v.
It sounds beautiful and powerful. It also drives more insensitive speakers.
2x220 w on 8 ohms 1khz is Pioneer's most powerful integrated amplifier.
Class H output stage, which means that the dynamic power supply works with 2 voltage stages, one for the normal signal level and one for the higher one. In the 4-6 ohm impedance position, a low supply voltage is recorded approx. It outputs 130 watts, so it can also be used for smaller speakers, if you switch it to 6-8 ohms, the high power supply will be active, then it will have a power of more than 200 wa at 8 ohms.
It exceeds 360 watts when operating at high speed. The A 90 is measured in a YouTube video, where the maximum current consumption is 1180 watts.
The German good-old-hi-fi service restored a piece. The current consumption of the A 200 was reported as 1400 watts in an article.
Its output is 231 watts at 8 ohms.
The converting toroidal transformer serves at 100 volts and provides the necessary current consumption and amperage, which can be seen in the price shown in the pictures.
I recommend a personal pick-up if you want your own sound wall with a source device and cables.
Or I can take you to Budapest with a friend, during which you can try it in your own conditions. The price is so high because the customs duty was about 50,000, plus the corresponding service transformer cost 40,000 forints. I can't afford the price.
I'm not interested in an exchange.